That is a great question!
I reached out to my contact at M-3 who makes the Locking Floor Mounted Storage Box for Enclosed Trailers - 19" x 29" x 7-1/4" # M387FR you were wanting to add to your cargo trailer, and the box is indeed rated for an ATV or UTV rolling over it when loading and unloading.
I included a video of the # M387FR for you to take a look at. view full answer...
I got the same information you did from UWS. The correct box is the UWS UTV Toolbox - Crossover Style - 3.2 cu ft - Matte Black, part # UWS83225, and the mounting kit is Custom Mounting Hardware for UWS UTV Toolbox, part # UWS08233.
I have included product description links below. view full answer...
The DeeZee Specialty Series ATV Toolbox - 2 Cu Ft # DZM206 does come in a 3 Cubic Foot option as well # DZM207. This box is 35x12x12-1/2 inches and includes the locks and hardware needed for mounting to your ATV. I've attached a video to assist. view full answer...
The DeeZee Specialty Series ATV Toolbox # DZM207 does not require support under the tool box to carry cargo. If you wanted to attach the back wall of the toolbox to the side of your car trailer you could easily carry 50-75 lbs of cargo.
You would want to brace the wall of the trailer as well as the install brackets used in the tool box. view full answer...
The Superwinch Winch 2 Go 4000 SR, part # SW1140232, is designed fto operate with power input from the batteries typically found in lawn tractors, ATVs, UTVs or motorcycles.
Naturally, the higher the battery capacity the more running time. According to my contact at Superwinch a jump box would give you enough power for single full-length pull. A fully charged 230-Ah motorcycle battery would do about the same. view full answer...
The Timbren Axle-Less Trailer Suspension System like the # ASR1200S04 will fit any frame width since it is a universal application. The main thing to be concerned about is the tires you are using. You will need to make sure there is enough clearance to use the 25" ATV tires you have.
The # ASR1200S04 has a brake flange for brakes and 6" between the frame and the hub face. This would allow for tires up to about 8" wide if you leave 2" of clearance between the frame and the tire.
The only... view full answer...
I checked with DeeZee and the ATV toolbox # DZM207 includes several nuts and bolts, washers, screws, and brackets. I have included a drawing that shows the hardware.
I do not see a problem using it on your Honda Pioneer 500. As long as it is secured to the ATV and you can still operate the Pioneer like normal you will be good to go! view full answer...
The DeeZee Specialty Series ATV Toolbox # DZM207 is 35" long x 12" wide x 12-1/2" tall, and the height does not take the lid into account. The interior dimensions of the toolbox will be the same, minus roughly 1/8". If you let me know the year, make and model of your truck I may be able to find something that works for you. view full answer...
The best I can do, without knowing your exact golf cart model, is show you how to calculate the maximum weight you can carry on your 2022 Ford F-250 when using the Mad-Ramps Pivoting Ramp System for ATV/UTV Ramps - 1,400-lbs - 2" Hitch, part # MR54FR, and tell you about the wheelbase limitations of what you can transport on the ramps.
Your vehicle has a maximum tongue weight of 2,100 lbs. In order to use the Mad-Ramps system, your golf cart needs to have a wheelbase of 88" from center... view full answer...
The best way to extend the wiring would be to get 10 Gauge Blue Primary Wire, part # 10-1-1, to extend the wiring and then use a 12-10 Gauge Butt Connector, part # 05732-2, to connect the wires. And then finally wrap the connection with Electrical Tape.
That should give you the additional 12 inches you would need to connect your Superwinch LT2000 ATV Winch, part # 1120210, to your 2005 Yamaha Wolverine 350 FX.
I attached installation instructions for the # 1120210 below. view full answer...
The Superwinch LT2000 ATV Winch - Wire Rope - Roller Fairlead - 2,000 lbs Item # 1120210 is a perfect solution for one person to move a 600lb tool box up and down a trailer ramp. It comes with a 49' cable with latched hook, pully block, D-shackle, and roller fairlead and is protected by a relay. view full answer...
The key to selecting the right weight distribution (WD) and sway control (SC) system is to first determine your trailer's actual fully-loaded tongue weight (TW). This is the measure that will let you select a system with enough stiffness to shift some of that TW forward onto the Explorer's front axle, but without being so stiff that it creates weird handling from the trailer. You also have to account for the weight of anything in the tow vehicle that sits behind the rear axle, such as a... view full answer...
We don't have anything that is the exact dimensions you mentioned. We have the RC Manufacturing Z-Series Truck or Trailer Underbody Toolbox - Steel - 9 Cu Ft - Black # UB1818-48 that is 48" Long x 18" wide x 18" tall if you don't need the precise measurements you listed. We also have the DeeZee Specialty Series ATV Toolbox - Utility Chest Style - Aluminum - 3 Cu Ft - Black # DZM207 which is 35" Long x 12" wide x 12-1/2" tall as another alternative.
I have also linked the page to all... view full answer...
While I was unable to locate a diagram showing installation of the Replacement Lock Cylinder for UWS Toolboxes w Square Paddle Handles - CH502 # UWSLOCKCH502 I did add a photo that should be helpful.
The accompanying photo is of the Replacement Locking Paddle Handle for UWS Toolboxes # UWSLOCKING and it shows the cylinder when it is in the locked position. So when you install the cylinder you will want to ensure it is in that position so you can lock the handle. view full answer...
The Performance Tool # PTW2997 charger would work for topping off and trickle charging, but is not really designed to charge a fully drained battery.
A better option for what you would be doing would be the Go Power Portable Solar system # 34282610. This is a fully portable 200 watt system and would be perfect for your needs. With it weighing over 50 pounds though, it can be a little cumbersome. I included a link to a review of this for you to check out.
For a more permanent option, the... view full answer...
Snowmobile trailers are notorious for having sway problems due to their short lengths and wide construction. this makes it hard to load the trailer with enough tongue weight to eliminate trailer sway, especially at higher speeds. The best prevention against trailer sway is proper trailer loading.
Going with a bias ply ST rated trailer tire may help a bit because the tire construction is inline with the tires direction of travel and the radial tires construction is across the direction... view full answer...
Between suspension enhancement and a weight distribution system, it's definitely the weight distribution first and air bags second. We recommend a weight distribution anytime your loaded trailer weighs half of what your 2015 GMC Acadia. So the best way to figure out what you need to is to put it all together and weigh it.
The most important factor in picking out a weight distribution system is tongue weight. You can determine your tongue weight by loading your trailer as if you were... view full answer...
Go To Results